Arctic Cat DVX 300 Manuel de l'opérateur télécharger pdf (Page 35)

33

ATV Operation

Starting A Cold Engine

1. Turn off all electrical accessories

(lights, etc.); then rotate the ignition

switch key to the first position (ON)

leaving the headlights OFF. Note

that the Neutral light is illuminated.

2. Push the choke lever to the left.

KM121A

3. Press on the starter button.

4. When the engine starts, move the

choke lever to the mid-position.

5. Allow the engine to warm up for

approximately 2-2 1/2 minutes; then

move the choke lever to the OFF

position. Do not touch the throttle

lever until the engine has run for at

least 3 minutes.

 NOTE: If the engine RPM starts to

decrease or if the engine starts to

stall, move the choke lever to the

left until RPM increases; then as the

RPM stabilizes, move the choke

lever to the OFF position.

6. Run the engine for at least 10 min-

utes so it is thoroughly warmed up.

If the engine is run for a shorter

period of time, the spark plug may

not have reached a high enough tem-

perature to burn off the excess fuel

in the combustion chamber.

Shifting (Utility)

This ATV has a dual-range automatic

transmission with reverse. To shift the

ATV, follow these steps:

1. To engage the high range from neu-

tral, move the shift lever outward

and forward.

2. To engage the low range from high

range, come to a complete stop; then

move the shift lever outward and

forward.

KM124A

 NOTE: The high range is for nor-

mal riding with light loads. The low

range is for carrying heavy loads or

trailer towing. Compared to HIGH

range, the LOW range position pro-

vides slower speed and greater

torque to the wheels.

3. To engage reverse gear from neutral,

move the shift lever outward and

rearward into the R position.

CAUTION

Do not run the starter motor for

more than eight seconds per start-

ing attempt. The starter motor may

overheat causing severe starter

motor damage. Allow 15 seconds

between starting attempts to allow

the starter motor to cool.

CAUTION

Always shift into low range when

operating on wet or uneven terrain,

when towing or pushing heavy loads,

and when using a plow. Failure to fol-

low this caution may result in prema-

ture V-belt failure or in damage to

related drive system components.

CAUTION

Always come to a complete stop before

attempting to shift from one range to

the other or into reverse. Always shift

on level ground, or engage the brake

lever lock before shifting into another

range or into reverse.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 83 84

Commentaires sur ces manuels

Pas de commentaire