Arctic Cat Prowler HDX Manuel de l'opérateur télécharger pdf (Page 31)

5. Remove the stake pocket retaining

bolts, jam nuts, and forward tie bolt

clip nuts and secure in a safe place

with the machine screws and bush-

ings from the tailgate.

HDX116A

To convert flat-bed to cargo box, use the

following procedure.

1. Set the tailgate into position in the

cargo bed; then lift the cargo bed

making sure the tailgate clears any

receiver hitch attachments.

HDX117A

2. Install the stake pocket retaining bolts

and jam nuts leaving clearance to

install side panel stakes.

HDX118A

3. Set the left and right cargo box side

panels into place on the cargo bed

engaging the stakes into the side

pockets.

HDX121

4. Install the left and right side clip nuts

onto the frame; then install and

tighten the forward tie bolts securely.

HDX116A

5. Tighten the four stake pocket retain-

ing bolts to 25 ft-lb making sure the

cargo box side panels are resting

firmly on the cargo bed; then tighten

the jam-nuts to 15 ft-lb. Lower the

cargo box.

HDX112A

HDX113A

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Pas de commentaire

Arctic Cat Prowler HDX Manuel de l'opérateur Page 31